difficult one

alb_bcn's picture

Comments

donshottype's picture

I didn't find this one. If it's a font, it's well hidden from the casual searcher.
If I had to make it from a font, rather than from scratch, I would start with Impact Bold Condensed http://www.myfonts.com/fonts/urw/impact/ and make the words as follows:
_r_.... use n, shift the top curved portion of the interior contour up so horizontal stroke is about half as thick, cut off the bottom 60% of the leg
_e_.... shift the top curved portion of the counter up so horizontal stroke is about half as thick, same procedure for bottom stroke, drop bottom of counter to thin horizontal stroke.
_s_.... use o, same procedure as for e to make top and bottom strokes thinner, cut openings in sides and add horizontal stroke.
_t_.... use U, delete rhs, same procedure as for e to make bottom stroke thinner, thin vertical stroke to match lower case width, add rhs crossbar
_a_.... use o, same procedure as for e to thin top and bottom strokes, cut opening in lhs and add horizontal stroke, square rhs bottom corner.
_u_.... use u, same procedure as for e to thin bottom stroke
_r_.... same as first r
_a_.... same as first a
_n_.... use n, same procedure as for r, but don't cut the leg.
_t_.... same as first t
_h_.... use h, same procedure as for n
_o_.... use o, same procedure as for e to thin top and bottom strokes.
_t_.... same as first t
_e_.... same as first e
_l_.... same as t, no crossbar
_c_.... use o, same procedure as for e to thin top and bottom strokes, cut opening in rhs
_a_.... same as first a
_n_.... same as first n
_e_.... same as first e
_t_.... same as first t
Don

Syndicate content Syndicate content